Step 5 - Calibration Status

On successful Calibration, you can view then results at the bottom of the screen as shown in Figure 7.

Figure 7 Calibration Status

The calibration status displayed are the camera positions in the global coordinate system defined by the reference markers and a merit value.  The merit value represents the average error in system units.  this value depends on the cameras and lenses being used and the measurement volume.  In addition to the camera status, the maximum wand length range and the standard deviation is also being displayed.

Once the camera system is calibrated, the cameras should not be moved.  If they were accidentally moved they need to be recalibrated again.