System Overview

 Previous  Next

 

MaxREAL is using Rigid Bodies with 3 or more markers in a known configuration in order to obtain 3D or 6DOF data.  You will need to setup and configure the following:

 

•Two or more cameras (Max300) or one or more dual head cameras (Max1500) with Installation Guides.
Max1500CameraMax300CameraInstallationGuide
 
•Wand Calibration Kit with WandKit Measurement Sheet
Calibration WandWandKitSheet
 
•Rigid Body Marker Kit(s)
6LEDBody3MarkerPassive
 
•A Windows Computer with USB3 and/or Ethernet port(s) and with MaxREAL software installed.
WindowsComputerMaxREAL_SoftwareBox_Small
 

This Getting Started section will guide you through each of the steps.